Advertisement
ENGLISH
8
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding electromagnetic fields.
Preparing for use
The appliance comes with a shoulder strap and flexible hose (FC6130)
or with a stick and floor nozzle (FC6132) for extra convenience during
vacuum cleaning.
The appliance also comes with a brush tool to clean delicate surfaces and
a crevice tool to clean the hard-to-reach places.
Attaching the shoulder strap (FC6130 only)
1
To attach the shoulder strap, connect the clasps to the attachment
points on the appliance.
Attaching the stick and the floor nozzle (FC6132 only)
1
To assemble the stick, connect the lower stick part to the upper
stick part ('click') (Fig. 2).
Note: You cannot disassemble the stick once you have assembled it.
2
Insert the stick into the attachment point for the stick at the back
of the appliance ('click') (Fig. 3).
-
Make sure the ridge on the stick aligns with the attachment point on
the appliance when the stick is inserted.
3
To detach the stick from the appliance, press the stick release
button with one hand (1) and pull the stick out of the appliance
with the other hand (2) (Fig. 4).
4
Attach the floor nozzle to the nosepiece (Fig. 5).
You can use the floor nozzle to clean hard floors and carpets.
The floor nozzle is equipped with a fluff collector that removes hair
and fluff.
5
Put the plug in the wall socket.
Advertisement
