Table of Contents
Advertisement
Available languages
Available languages
Trimming Ear hair
1)
Clean outer area of ear and ear canal. Make sure it is free of wax.
2)
Nose, ear and eyebrow attachment should be on the Groomer.
3)
Switch the Groomer on and move the tip softly around the edge of ear to remove hairs
extending beyond the outer ear (fig. 13).
4)
Carefully insert the tip into outer ear canal.
CAUTION: Do not insert the tip further than 5mm into the ear as this could causedamage to
the eardrum (fig.14).
5)
Turn off Groomer. Wipe attachment clean after each use.
Trimming Eyebrow
1)
Nose, ear and eyebrow attachment should be on Groomer
2)
Switch the Groomer on and use the tip to cut individual eyebrow hairs.
3)
The Groomer can be used for clipping single long hairs.
4)
Put the Groomer at the root of the hair and move it along the edge of the eyebrow from the
base of the nose towards the outer tip of the eyebrow in the direction of hair growth (fig.15).
IMPORTANT: Do not use the Groomer to define or trim the entire eyebrow. Do not try to trim
your eyelashes. Be careful not to get too close to your eyelashes and eyes!
5)
Turn off Groomer. Wipe attachment clean after each use.
ShAVING WITh MICRO ShAVER ATTAChMENT
1)
Put the micro shaver attachment on the groomer (fig.16).
2)
Use the narrow micro shaver to shave along contoured edges to remove any stubble while
creating a smooth welldefined beard line.
Before using the micro shaver, always check it for wear and damage. If the micro shaver
shows signs of wear or damage, do not use it as injury may occur. Do not use the micro
shaver until it has been replaced. Gently press the micro shaver onto the skin. Do not press
too hard.
hAIR CLIPPING
•
Before you start clipping, make sure that
the head of the person whose hair you are
cutting is at the same level as your chest
so that all parts of his/ her head are clearly
visible and within easy reach.
•
Only use the appliance on dry hair.
•
Do not use on freshly washed hair.
•
Before you begin, comb the hair in the
direction of growth.
•
To achieve optimal clipping results, always move the appliance slowly through the hair against
the direction of hair growth.
ENG - 40
Advertisement
Table of Contents
