Sabre RG1128 Operator's Manual page 88

ENG 42
PROBLEM SITUATION
9. Unusual vibra- Key in «ON»,
tions while engine running
working
If problems continue after having carried out these operations, contact your
Dealer .
WARNING!
!
have the necessary equipment and the technical knowledge. The gua-
rantee is automatically revoked and the manufacturer declines all
responsibility for any repairs which are badly done.
LIKELY CAUSE
– the blade is imbalanced
– blade loose
– fixing screws loose
– cutting deck is obstructed
Do not take on complicated repair work if you don't
TROUBLESHOOTING
SOLUTIONS
– balance or replace the
damaged blade
– check that the blade is
firmly fitted
– check and tighten all the
fixing screws of engine and
the machine
– remove the grass-catcher,
empty the collector channel
and clean the inside of the
cutting deck