Sabre RG1128 Operator's Manual page 84

ENG 38
G
UIDE TO SCHEDULED MAINTENANCE
This table is to help you maintain your machine's safety and performance. It
shows the main maintenance and lubrication work, indicating the frequency with
which it should be carried out.
To the right of each one there is a box where you can write the date or after how
many hours of operation the work was carried out.
W
ORK
1. MACHINE
1.1 Check of tight fixing and sharpness of blade
1.2 Blade replacement
1.3 Check of the transmission belt
1.4 Transmission belt replacement
1.5 Checking the blade drive belt
1.6 Blade drive belt replacement
1.7 Check and adjustment of brake
1.8 Check and adjustment of drive
1.9 Check blade engagement and brake
1.10 Check of tight fixing of all the elements
1.11 General lubrication
1)
2. ENGINE
2.1 Engine oil change
2.2 Check and cleaning of air filter
2.3 Air filter replacement
2.4 Check of fuel filter
2.5 Fuel filter replacement
2.6 Check and cleaning of spark plug points
2.7 Replacement of spark plug
1)
See the engine booklet for a full list and methods of work.
2)
If worn, immediately contact your Dealer for the replacement.
3)
General lubrication should be carried out whenever the machine is to be left
unused for a long period.
2)
2)
3)
H
OURS
25
100
25
–
25
–
10
10
10
25
25
.....
.....
.....
.....
.....
.....
.....
MAINTENANCE
D N°
ATE OR OF HOURS