Sabre RG1128 Operator's Manual page 57

UNPACKING AND ASSEMBLY
IMPORTANT
ting in, never start the engine until the battery is fully charged!
WARNING!
!
safe handling and disposal.
FITTING THE GRASS-CATCHER
8
1 2
3
First of all assemble the frame, joining the upper part (1), including the opening,
to the lower part (2), using the supplied nuts and screws (3) and following the
indicated sequence.
Position the angle supports (4) and (5), respecting the right (R
sides, and attach them to the frame using the four self-tapping screws (6).
Insert this frame into the canvas cover, ensuring that it is correctly positioned
along the base perimeter.
To prevent the safety device in the electronics card from cut-
Follow the battery manufacturer's instructions regarding
10 9 8
1
4
R
3 2
11
12
ENG 11
10
6
5
L
2
6
13 12
13
) and left (L )
6
4 - 5