Installation H-Model; Transportation And Unpacking, W465H, W475H, W4105H - Electrolux W465H Installation Manual

Installation H-model

Transportation and unpacking,
W465H, W475H, W4105H
The machine is delivered complete with expan-
sion bolts etc. packed inside the machine in the
drum.
The machine is delivered bolted onto the trans-
port pallet and packed in a crate or box.
• Remove packing from the machine.
• Remove front panel. Remove the bolts
between the machine and pallet.
• Mount front panel.
When the machine is lifted off the pallet: Make
sure that the machine does not come down on
the floor with either of the rear corners first. The
side panel of the machine can be damaged.
• Mount the feet.
• Place the machine on its final position.
1
• Level the machine with the feet of the
machine.
The machine also comes with transport safety
2
devices (four plate angles between the support
and the drum).
In order to remove the safety devices:
• Remove front and rear panel.
• Remove both front metal angels.
3
• Remove both rear metal angels.
• The machine may not be moved with the
transport securities removed. Save the trans-
port securities for future use.
Installation
1
2
3
13
5327A
5325
5326