Service Mode Identification - Pioneer SVM-1000 Service Manual

1

6.3 SERVICE MODE IDENTIFICATION

A
Page0 : VERSION
Mode to display the versions of the main CPU, sub CPU,
Audio DSP, video DSP, FPGA1, and FPGA2
B
C
The versions of the respective devices are displayed.
The version of the main CPU is also used as the
product version.
Page1 : Device Check
Mode to check whether the devices are operating.
D
E
F
Any defective blocks of the product can be detected in this mode.
If the corresponding device has been activated normally, "OK" is displayed.
For a device detected to be abnormal, "NG" is displayed.
28
1
2
Page2 : Calibration
Touch-Panel Calibration Mode
SVM-1000
2
3
TOP PANEL
Perform calibration for the top panel (page 2-1).
BOTTOM PANEL
Perform calibration for the bottom panel (page 2-3).
3
4
4