Pioneer SVM-1000 Service Manual page 36

1
Page4 : SWITCH TEST
Mode to indicate the switch positions
Check that the settings are switched properly.
A
B
C
When you change a switch setting, the corresponding
indication of the selected position lights in red.
Page5-1 : VOLUME TEST (1)
Mode to indicate the volume-control positions
Check that the volume controls (MIC/HEADPHONE/CH1
/CH2 blocks) function properly
The A/D-converted values of the volume
control settings are displayed as bars.
D
E
The A/D-converted values of the volume control settings
are numerically displayed in the range from 0 to 1023.
F
36
1
2
Page5-2 : VOLUME TEST (2)
Mode to indicate the volume-control positions
Check that the volume controls (CH3/CH4/FADER
/MASTER/BOOTH blocks) function properly.
The A/D-converted values of the volume control settings
are numerically displayed in the range from 0 to 1023.
SVM-1000
2
3
The A/D-converted values of the volume
control settings are displayed as bars.
3
4
4