Using The User Mode - Pioneer DJM-S9 Operating Instructions Manual

7 Press the same performance pad again.
Loop playback is canceled.
Using the saved loop
With this function, loop is saved in a loop slot of Serato DJ or a saved
loop is called.
1 Press the [ROLL] mode button while pressing the
[SHIFT] button.
The mode switches to saved loop mode.
2 During loop playback, press a performance pad.
A loop is assigned to the loop slot of Serato DJ.
Slot 1
Slot 5
3 Press the performance pad while pressing the [SHIFT]
button.
Playback continues by returning to the beginning of the loop.
4 Press the same performance pad again.
Loop playback is canceled.
5 During loop playback, press the [PARAMETERc]
button.
Halves the loop playback length.
6 During loop playback, press the [PARAMETERd]
button.
Doubles the loop playback length.
7 During loop playback, press the [LOOP 1/2X] or
[LOOP 2X] button while pressing the [SHIFT] button.
The loop moves, remaining the same length (loop shift).
! When the loop shift function is used, if the length of the called
loop is changed, the loop setting is overwritten and saved.
Using the Sampler Roll function
This function plays sampled sounds repeatedly, according to the beat
timing of the BPM of the track that is loaded in the deck.
! The default value is 1/4 beat.
! Select the trigger mode on the [SP-6] panel on the com-
puter's screen when using the sampler roll function. It will not oper-
ate properly in other play modes.
1 Press the [PANEL SELECT] button to open the [SP-6]
panel on the computer's screen.
2 Press the [SAMPLER] mode button while pressing the
[SHIFT] button.
The unit switches to the sampler roll mode.
3 Operating the mouse on the computer's screen, drag
and drop tracks to load them into the [SP-6] panel's slots.
The sampler settings and loaded tracks are saved.
18
En
Slot 2 Slot 3 Slot 4
Slot 6 Slot 7 Slot 8
4 Operate the mouse to set the playing mode of the
sampler slot on the computer's screen to the trigger
mode.
: Trigger mode
: Hold mode
: On/off mode
! For details on the sampler slots' playing modes, see the Serato DJ
software manual.
= Downloading the Serato DJ software manual (p. 5 )
5 Press the [PARAMETERc] or [PARAMETERd] button
to select the number of beats to be repeated.
The number of beats changes each time the [PARAMETERc] or
[PARAMETERd] button is pressed.
1/32n1/16n1/8n1/4n1/2n1
6 During playback, press and hold a performance pad.
Playback of the sampler slot starts. Playback continues while the pad
is pressed by returning to the start position repeatedly according to the
selected beat timing.
! With the sampler roll function, multiple sampler slots can simultane-
ously be played repeatedly.
7 Release your finger from the performance pad.
Sampler slot playback returns to normal.
! When the performance pad is pressed while pressing the [SHIFT]
button, the currently playing slot stops.

Using the user mode

The user mode is the function to assign the desired Serato DJ func-
tion to the performance pad of this unit by using the unit with the MIDI
assignment mode of Serato DJ.
! For the MIDI assignment mode of Serato DJ, refer to Serato
DJ's manual.
= Downloading the Serato DJ software manual (p. 5 )
1 Press the pad mode button twice in succession while
pressing [SHIFT] button.
The unit switches to the user mode.
! The user mode can be set to each pad mode button. The functions
are the same for all user modes.
— [HOT CUE] button: user mode 1
— [ROLL] button: user mode 2
— [SLICER] button: user mode 3
— [SAMPLER] button: user mode 4
2 Click the [MIDI] button at the upper right of the
Serato DJ screen.
Serato DJ switches to the MIDI assignment mode.
3 Click the function to be assign to a pad on the unit
with a mouse.
The diagram below is a screen example of assigning the [d] (PLAY)
button.