Calling Line Identification; Handsfree Mode - Gigaset E630A Setup & User Manual

Accepting/rejecting call waiting
If you receive a call while conducting an external call, you will hear the call waiting tone. If the
number is transferred, you will see this number or the name of the caller on the display.
¤ ¤
Rejecting a call:
¤
Accepting a call:
The previous call is placed on hold. 
Returning to the call on hold: To end the current call and return to the call on hold, press a.
Caller display

Calling Line Identification

The caller's phone number is displayed. If the caller's number is stored in your phonebook, the
number type and name are displayed.
No Calling Line Identification
Instead of name and number, the following is displayed:
u
External: No number has been transferred.
u
Withheld: Caller has withheld Calling Line Identification (
u
Unavailable: Caller has not requested Calling Line Identification.
Notes on phone number display for CLIP
By default, the number of the caller is shown on the handset of your telephone,
¤
www.gigaset.com/service

Handsfree mode

If you are going to let someone listen in, you should tell the other party that this is happening.
Activating/deactivating handsfree mode during a call, when establishing the connection and
when listening to the answer machine (only for devices with an integrated answer machine
¢
page 33):
¤ Press c.
Placing the handset in the charging cradle during a call:
¤
Press and hold c for a further 2 seconds while placing the handset in the charging cradle.
¤
q Reject waiting call
Options
¤
Press the display key Accept. You will then be speaking to the new caller.
¤
OK
¢
page 23).
Making calls
¢
page 64 or
21