Cup Warmer (Optional); Emergency Conditions; Programming Menu (Electronic Machine) - Grimac G 11 Operating Instructions Manual

Hide thumbs Also See for G 11:
Table of Contents

Advertisement

6.5 Cup warmer (optional)

Attention: do not cover the cup warmer
plate with a cloth.
Machines can be equipped with a cup-warming plate for the
storage and heating up of the cups.
On the plate only place coffee cups, tea cups and glasses for
the service of the coffee machine. No other objects must
be placed on the tray.
Thoroughly drain the cups before placing them on the tray.
To activate the "cup warmer" func-
tion press the key positioned on
the machine's instrument panel.

6.6 Emergency conditions

To stop the machine in any emergency situ-
ation decisively turn the selector switch to
the "0" position.
In the event of freeze, contact the service centre of a skilled
technician.
In the event of fire, evacuate the area im-
mediately to permit the action of trained
personnel equipped with suitable protec-
tion means. Always use approved extin-
guishers and never use water or substanc-
es of uncertain nature.
44
7 PROGRAMMING MENU
(ELECTRONIC MACHINE)
Machines with electronic control panel allow programming
the quantity of coffee and hot water dispensed by simply
touching a button.
N.B. Before programming the coffee keys,
prearrange the machine for the dispensa-
tion as shown in paragraph 6.2.1. Place the
cup or small cup under the dispensing spout.
For example, let's examine the programming of a double
machine.
• To access dose programming mode, press the
button for at least 5 seconds until the corresponding led
remains on.
• Press the button corresponding to the selection to be
programmed. The pump and the solenoid valve of the
group are enabled.
• After obtaining the desired volume. press the button
again. Brewing stops.
• Before proceeding with a new selection, check that the
LEDs of the previous selection are switched OFF and pro-
ceed as before for the new dose to dispense.
• In the same way you can programme the amount of water to
be dispensed by the machine by using this button
• THE LEFT BUTTON PANEL ALSO PROGRAMMES THE OTHER
ONES.
NOTE: to ensure a proper programming, re-
place the coffee grounds with fresh coffee
before each dosing procedure.
NOTE: The dosage of this machine is volu-
metric.
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents