Cleaning Care For Top And Bottom Cowls - Mercury 75 Pro XS FourStroke Operation Maintenance Installation Warranty Manual

2. Bring the front of the cowl down first and engage the front cowl hook.
Lower the cowl into the seated position and apply pressure to the back of
the cowl to lock it in place. Ensure the cowl is securely fastened by trying
to pull up on the back of the cowl.

Cleaning Care for Top and Bottom Cowls

IMPORTANT: Dry wiping (wiping the plastic surface when it is dry) will result in
minor surface scratches. Always wet the surface before cleaning. Do not use
detergents containing hydrochloric acid. Follow the cleaning and waxing
procedure.
CLEANING AND WAXING PROCEDURE
1. Before washing, rinse the cowls with clean water to remove dirt and dust
that may scratch the surface.
2. Wash the cowls with clean water and a mild nonabrasive soap. Use a soft
clean cloth when washing.
3. Dry thoroughly with a soft clean cloth.
4. Wax the surface using a nonabrasive automotive polish (polish designed
for clear coat finishes). Remove the applied wax by hand using a clean
soft cloth.
5. To remove minor scratches, use Mercury Marine Cowl Finishing
Compound (92‑859026K 1).
eng
MAINTENANCE
69
47633