Program Table - Hitachi L26H01U Instructions For Use Manual

Program Table

By pressing /
a
`
Press to display Program Table.
3URJUDP 7DEOH
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except the AV
mode). By cursor action, programme selection is done
automatically.
Name
To change the name of a decided programme, select
the programme and press the RED button.
The first letter of the selected name will be highlighted.
b
Press / button to change that letter and
a
button to select the other letters. By pressing the RED
button, you can store the name.
Insert
Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By navi-
gation buttons move the selected programme to the
decided programme space and press the GREEN but-
ton again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the se-
lected programme from the programme list, and the
programmes below shift one up.
Downloaded From TV-Manual.com Manuals
b
button, select Program Table.
APS (Auto Programming System)
When you press the BLUE button for APS, Auto Pro-
gramming System Menu will appear on the screen.
A.P.S. (Auto Programming System) Country
_ `
Press / button to select your country. If you want
to exit from A.P.S. function, press the BLUE button.
When you press OK or RED button for starting APS,
all stored programs will be erased and the following
screen will be displayed:
_ `
/
Whenever you press the BLUE button, A.P.S. func-
tion stops and Program Table appears on the screen.
If you wait until the end of A.P.S., Program Table is
displayed with the programmes found and located.
Program
By pressing
a
`
/ button to select the program number. You can also
enter a number via digit buttons on the remote control.
There are 100 program storage between 0 and 99.
- 25 -
$XWR 3URJUDP
$36 LV UXQQLQJ
b
/ button, select Program. Press
_