Common Connections; Connecting To The Tv With Scart; Connecting To The Tv Without Scart - Nokia Mediamaster 121 T User Manual

Nokia mediamaster user guide 121 t
Hide thumbs Also See for Mediamaster 121 T:
Table of Contents

Advertisement

Connecting the Mediamaster

Common connections

There are many different types of TV/VCR and other equipment that
you can connect to the Mediamaster.
In this section you will see some of the most common ways to con-
nect your equipment.
If you have problems with your connections and need help, contact
your retailer or Nokia Support.

Connecting to the TV with SCART

• Remove the aerial lead from your TV and connect this to the TV
AERIAL input socket on the Mediamaster.
• Connect a SCART cable between the main SCART socket on the TV
and the TV SCART socket on the Mediamaster.
• Connect an RF cable from the TV/VCR output on the Mediamaster
to the RF input socket on the TV.
• Switch on your TV, plug in and switch on your Mediamaster.
You may need to select the AV ( SCART ) channel on your TV to
watch Digital TV. In some cases your TV will automatically se-
lect this channel when the Mediamaster is switched on.
Note: The RF lead will need to be connected in order to watch
analogue channels ( your old 1,2,3,4,5 )
It is always advisable to consult your TV instruction book.

Connecting to the TV without SCART

• Remove the aerial lead from your TV and connect this to the TV
AERIAL input socket on the Mediamaster.
• Connect an RF cable from the TV/VCR output on the Mediamaster
to the RF input socket on the TV.
• Switch on your TV, plug in and switch on your Mediamaster.
• Select a programme number on the TV that is not currently used
for other TV channels.
• Follow the instructions in your TV manual to tune the TV to pick
up the First time installation menu.
• Follow the instructions in your TV manual to store this channel.
• When the First time installation menu is visible, press the ok
button on the Mediamaster's remote control to start the instal-
lation procedure.
If the picture quality is bad you can later change the predefined UHF
channel 43 to any other figure between 21 and 69. You will also
have to tune your TV to the same (= the new) channel number.
Please see RF modulator output channel setting on page 15.
GB 8
RF
SCART
RF

Advertisement

Table of Contents
loading

Table of Contents