Tuning Procedure When Rf Connections Are Used - Nokia MEDIAMASTER 9850 T Owner's Manual

Tuning procedure when RF connections are used

If you have connected your Mediamaster using SCART leads, you
do not have to manually tune your Mediamaster to your TV or
video. The steps below explain what to do if you have been
unable to use SCART in your connection.
To tune your TV for RF connections you might also need your TV
manual as well as this manual.
• Plug in your TV, Mediamaster (and video).
• Switch on the TV.
• Press to switch the Mediamaster on.
Tuning your TV to the ITV Digital Mediamaster
• Select a programme number on the TV that is not currently
used for a terrestrial TV channel.
• Follow the instructions in your TV user manual to tune the TV
channel selector to channel 21(this is the Mediamaster's
factory preset RF channel). If you are already using this
channel e.g. for a terrestrial TV channel, select another non
occupied UHF channel between 21to 69 on the TV.
For example, if you then select UHF channel 50 on your TV,
you must change your Mediamaster to the same channel. To
do this, refer to page 25 and change option 6 within the 'tv and
video settings' menu.
• When you have correctly changed the UHF channel number
you will see the ' welcome ' message on the TV screen
• Follow the instructions in your TV manual to store this as your
digital terrestrial channel. You will have to select it when you
want to watch digital terrestrial channels.
• Once the welcome message is visible press the SELECT
button on the Mediamaster remote to start the Installation
procedure.
• If the welcome message is missing or there is interference on
other channels you will have to change the UHF channel
number. Press MENU on the front panel or on the remote. You
will see the main menu. Select viewing preferences , then tv
and video settings and UHF channel number. See page 25.
If you have a video connected it must be tuned with different
UHF channel (between 21 to 69) than the Mediamaster.
GB 10
Customer Services
0808 100 0101
welcome
Press select on your remote to
get started
select