Table of Contents
Advertisement
Navi Bars
TV folder
Time adjustment
The time is adjusted by using the
time.
TV screen format
Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for widescreen TV.
Press opt to get a TV programme in the background and you can
instantly watch the result of your choice.
Picture format
If you do not have a Widescreen TV and the transmission is in
widescreen, you can select Fullscreen, Letterbox or Combined to
change the display format. Fullscreen will fill up the screen vertically
but, cut some information from the left and right sides of the pic-
ture.
Letterbox and Combined will give a complete picture, but leave
black areas at the top and bottom.
• Press opt or back to return to TV/radio mode.
Position of the RGB output
Adjust the horizontal position of the TV picture with the
tons.
TV output
If you have connected your Mediamaster to your TV with a SCART
lead, the best option for picture quality is "RGB", however if your TV
does not support "RGB" you may see an improved picture if you
change this option to "Composite".
If you do not see any improvement in the picture quality, please
ensure the setting remains on "RGB".
RF modulator output channel
Select this alternative if you have to change the RF channel. (Chan-
nel 43 is preset from factory.)
When you change the RF channel number, you must also change to
the same value on the TV. If you do not, there will be no picture and
sound.
buttons, ±1/2 an hour at a
Fullscreen
but-
Letterbox
Combined
GB 15
Advertisement
Table of Contents
