Programming Over Project 25 (Pop 25) (Astro 25 And Astro Conventional); Responding To The Notification Of Upgrade - Motorola APX 4000 User Manual

A blinking cursor appears in the Friendly Name
screen.
3 Use the keypad to edit the text.
4 Perform one of the following actions:
• Press the Menu Select button directly below
Ok to save the new Friendly Name and return
to the Bluetooth feature screen.
• Press the Menu Select button directly below
Cncl to return to the Bluetooth feature screen.
Programming Over Project 25 (POP 25)
(ASTRO 25 and ASTRO Conventional)
This feature enables configuration data to be
upgraded to your radio over-the-air. This feature
retains full use of the radio during the configuration
data transfer without interrupting communication. The
upgrade pauses to give priorities to voice call, and
continues after the voice call ended.
Once a configuration upgrade is downloaded to your
radio, you can install new changes immediately or
delay changes to be installed on the radio when it is
being powered up.
156
English
Your radio can also be configured to allow you to
accept or reject an upgrade.
Note: This feature must be preprogrammed by a
qualified radio technician. Check with your dealer or
system administrator for more information.

Responding to the Notification of Upgrade

1 The display shows Upgrade?.
2 Perform one of the following actions:
• Press the Menu Select button below Acpt to
accept the request to upgrade immediately.
• Press the Menu Select button below Dlay to
delay the request to upgrade.
• Press the Menu Select button below Rej to
reject the request to upgrade.
One of the following scenarios occurs:
•
If you choose to accept, the display shows Upg Rx
In Prog to indicate the upgrade received is in
progress.
If the upgrade is successful, the display shows
Program done.