Using The Time-Out Timer; Time And Date Setup - Motorola APX 4000 User Manual

a) To turn the feature off or on, press the
preprogrammed Voice Mute button.
• Turning Voice Mute on or off via the radio menu:
a)
or to VMut.
b) Press the Menu Select button directly below
VMut.
The display shows momentary Voice mute off, and
you hear a short tone, indicating that the feature is
disabled or the display shows momentary Voice
mute on, and you hear a short tone, indicating that
the feature is enabled.

Using the Time-Out Timer

This feature turns off your radio's transmitter. You
cannot transmit longer than the preset timer setting.
If you attempt to do so, the radio automatically stops
your transmission, and you hear a talk-prohibit tone.
The timer is defaulted at 60 seconds, but it can be
preprogrammed from 3 to 120 seconds, in 15-second
intervals, or it can be disabled entirely for each radio
mode, by a qualified radio technician.
Note: You hear a brief, low-pitched, warning tone four
seconds before the transmission times out.
1 Hold down the PTT button longer than the
preprogrammed time.
You hear a short, low-pitched warning tone, the
transmission is cut-off, and the LED goes out until
you release the PTT button.
2 Release the PTT button.
The timer resets.
3 To re-transmit, press the PTT button.
The time-out timer restarts and the LED lights up
solid red.

Time and Date Setup

You can set the time and date for your radio.
Settings:
• The default time setting is a 12-hour clock. The
display shows 12:00AM.
• The AM/PM selection is not available for the 24-
hour clock setting.
• The default setting for the domestic date shows
MDY.
Note: Check with your dealer or system administrator
for additional programmable settings for this feature.
169
English