Measuring The Distance And Bearing From A Saved Waypoint; Location Feature In Emergency Mode; Peer-Location On The Display (Astro Conventional Only) - Motorola APX 4000 User Manual

button directly below No to return to the Waypoints
main screen.
The display shows All saved waypnts deleted.
Measuring the Distance and Bearing from a Saved
Waypoint
Ensure your radio shows the current location on the
screen.
1 Press the Menu Select button directly below
Optn.
2 or
Menu Select button directly below Sel.
The display shows a list of waypoints.
3 or
Menu Select button directly below Sel.
The display shows the distance and bearing from the
current to the selected coordinates.

Location Feature in Emergency Mode

When the Emergency feature is activated by pressing
the emergency button, the radio exits the Location
menu and returns to the Home (default) screen so
136
that you can see which channel the emergency signal
is going out on.
English
to Dist frm here and press the
to the required waypoint and press the
However, you may re-enter the Location menu while
still in emergency mode, provided that Silent
Emergency has not been activated.
If you have turned Location off using the ON/OFF
menu key, it automatically turns back on when
Emergency is activated.
If there is a solid location signal during Emergency,
the current location and the location information
received is saved as Emergency and Last Known
Location waypoints, respectively.
Peer-Location on the Display (ASTRO Conventional
only)
This feature is only available for radio-to-radio voice
transmissions, dispatch call, emergency call and
selective call in conventional ASTRO system. For
radio-to-radio transmission, in order to allow the radio
to show peer-location, the voice should be directly
sent from one radio to another radio without passing
through any infrastructure facility such as repeaters,
phone or DVRS system. Both the transmitting radio
and receiving radio must be configured to enable
them to send and/or receive the GPS coordinates.
You can check with your nearest qualified technician
for more details.
Note: If the receiving radio is operating in a Mixed
Mode channel, only if its voice transmission is via