Dismantling Instructions - Princess 1945 Instructions For Use Manual

PRINCESS CLASSIC PASTAMACHINE
First read through these instructions carefully and keep for future reference. Check whether the mains
voltage in your home is the same as that of the appliance (230 Volt).
The PRINCESS CLASSIC PASTAMACHINE is an excellent, fully automatic pasta machine for homemade
pasta. The powerful motor makes the most beautiful pasta within a short time. Equipped with 10 different
attachments that allow you to make different types of pasta. The appliance is also easy to clean.
Description of the components of the pasta machine
1. Casing/motor casing
2. On/Off switch
3. Closing slide
4. Unlocking button for the cover
5. Cover
6. Stirring mechanism
7. Unlocking button for the mixing container
8. Mixing container
9. Extrusion chamber
10. Dough transport coil
11. Sealing washer
When you open the appliance for the first time, you
will find the following accessories:
- A: measuring cup for measuring out dry ingredients
- B: measuring cup for measuring out liquids
Attention: These measuring cups are specially
designed for the pasta machine and do not come in
standard sizes.
In addition, the packing also contains the following:
- C: a ring spanner
- D: a plastic knife that can also be used as a scraper
- E: a cleaning attachment
- F: ten different pasta-shaping attachments
Your pasta machine is supplied fully assembled by the
manufacturer. Carefully follow the instructions given below
for the installation and dismantling of the appliance.

DISMANTLING INSTRUCTIONS

1. Check to ensure that the pasta machine is not connected to the mains.
2. Remove the locking washer (11) together with the pasta attachment (F). If necessary, use the ring
spanner for this purpose (C).
3. Carefully remove the dough transport coil (10). If after use, the back of the coil is full of sticky dough,
first dismantle the coil according to the following instructions. You can remove the coil by lightly
tapping the end of the shaft and then removing the same.
4. Pull the closing slide (3) fully out of the appliance by gently pushing the locking button located above
the closing slide.
5. Press the unlocking button (4) for the cover, located on the front side of the cover (5) on the mixing
container (8) downwards by pulling it gently forward and lift the cover.
6. The unlocking button (7) for removing the mixing container (8) is located on the hin-
ging side of the cover near the casing (1).
7. Press the unlocking button and remove the mixing container.
8. Pull the chrome-plated drive shaft of the stirring mechanism (6) outward and remove it
from the mixing container.
9. Now carefully clean all the components that come into contact with the dough, either
by hand or in the dishwasher.
ART. 1945
8