To begin dispensing the drink, press
4.
the rotary selector.
Milk froth or warm milk is dispensed
into the cup or glass.
To prematurely stop dispensing
Note:
the drink, press the rotary selector
again.
Dispensing hot water
Before dispensing hot water,
Note:
clean the milk system and remove the
milk container. If the milk system is not
cleaned, the dispensed water may
contain small quantities of milk.
~ "Cleaning the milk system"
on page 25
:
Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
Button
Function
Selecting the coffee
"
strength, ground coffee
milk
Milk/coffee mixing ratio
ml
Cup size
2 cups at once
#
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
The appliance is switched on. The water
tank has been filled.
Place a cup under the outlet system.
1.
Remove the milk container, if
2.
connected.
Select "Hot water" with the rotary
3.
selector.
To change the settings for the
4.
selected drink
~ "Adjusting beverage settings"
on page 17
To begin dispensing the drink, press
5.
the rotary selector.
Hot water is dispensed into the cup.
To prematurely stop dispensing
Note:
the drink, press the rotary selector
again.
Adjusting beverage settings
Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
Selection
very mild
■
mild
■
normal
■
high
■
Setting share of milk in %
(only for coffee drinks with milk)
Adjustment of the volume in ml increments.
Not available for ristretto.
Place 2 cups under the outlet.
Adjusting the coffee strength or
selecting ground coffee
A coffee drink is selected.
Press the " button.
1.
Use the rotary selector to set the
2.
coffee strength or select ground
coffee.
Press the "button or the rotary
3.
selector to confirm.
Operating the appliance en
very strong
■
aromaDoubleShot strong
■
aromaDoubleShot strong +
■
Ground coffee
■
17