Specifications - Makita DTM41 Instruction Manual

ENGLISH (Original instructions)
1-1. Button
1-2. Red indicator
1-3. Battery cartridge
2-1. Star marking
3-1. Slide switch

SPECIFICATIONS

Oscillation per minute
Oscillation angle, left/right
Standard battery cartridge
Net weight
* NOTE: For continuous operation, high capacity battery cartridge, BL1430, BL1440, BL1830, BL1840 and BL1850, is recommended.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.
Noise
The typical A-weighted
according to EN60745:
Work mode: Sanding
Model DTM41
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DTM51
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Explanation of general view
4-1. Dial
5-1. Indication lamp
6-1. Holder bolt
6-2. Lock lever
7-1. Holder bolt
Model
Overall length
without dust extraction attachment
with dust extraction attachment
Rated voltage
noise level determined
) : 76 dB (A)
pA
) : 77 dB (A)
pA
DTM41
BL1430/
BL1440
340 mm
2.1 kg
2.2 kg
D.C. 14.4 V
ENE080-1
Work mode: Cutting with plunge cut saw blade
Model DTM41
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DTM51
ENG905-1
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Work mode: Cutting with segmental saw blade
Model DTM41
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DTM51
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
3
7-2. Holes in the application tool
7-3. Protrusions of the tool flange
9-1. Adapter
-1
6,000 - 20,000 (min )
1.6 ﾟ (3.2 ﾟ total)
BL1830/
BL1415 */
BL1840/
BL1415N *
BL1850
326 mm 340 mm
2.0 kg 2.2 kg
2.1 kg 2.3 kg
) : 80 dB (A)
pA
) : 91 dB (A)
WA
) : 81 dB (A)
pA
) : 92 dB (A)
WA
) : 77 dB (A)
pA
) : 76 dB (A)
pA
DTM51
BL1815 */
BL1815N */
BL1820 *
326 mm
2.0 kg
2.1 kg
D.C. 18 V