Planet VRT-402N User Manual page 34

Sequence Number
Rule Name
MAC
Action
ACL Enable
Static ARP Enable
Static DHCP Enable
IP
MAC Access Control
Default MAC Access Control
Action
3. Click on [Add] tab. You will see the following screen.
4. Example: Bind IP to a MAC
If users need to bind an IP to a specified MAC (network device), one can follow the settings as
below.
Sequence Number
Rule Name
MAC
Action
ACL Enable
Static ARP Enable
Static DHCP Enable
IP
This defines the sequence (priority) of all the MAC ACL actions.
Name of the MAC access rule.
Set up the MAC Address to which you would like to enable the MAC ACL action.
Choose ALLOW/DENY to ALLOW/DENY
Enable/Disable this MAC access rule
Enable/Disable this Static ARP rule
Enable/Disable this Static DHCP rule
The IP address corresponds to static ARP or static DHCP.
Choose Enable/Disable to enable/disable MAC access Control
The default ACL action of the ACL rules. When you add the individual rules,
it can be viewed as exceptions and take effects relating to the default action.
If the action of the adding rule is the same as the default action, then this
rule will not work.
User1
Enable
00:30:4F:55:66:77
Allow Access
Enable
Enable
Enable
192.168.0.100
34