Canon MX520 series Online Manual page 95

Note
The print head alignment sheet cannot be scanned if it is loaded in the ADF (Auto
Document Feeder).
(2) Close the document cover gently, then press the OK button.
The machine starts scanning the print head alignment sheet, and the print head position will be
adjusted automatically.
Important
Do not open the document cover or move the print head alignment sheet on the platen
glass until adjusting the print head position is complete.
If the error message appears on the LCD, press the OK button to release the error, then
take appropriate action.
A Message Is Displayed
(3) When the completion message appears, press the OK button.
The screen will return to the Maintenance screen.
Remove the print head alignment sheet on the platen glass.
Note
To access other available functions, use the mode buttons or the MENU button.
If the print results are still not satisfactory after adjusting the print head position as described above,
adjust the print head position manually from the computer.
Aligning the Print Head Position from Your Computer
To print and check the current head position adjustment values, select Print the head alignment
value on the Maintenance screen.