Changing The Settings In The Wired Lan Sheet - Canon MX520 series Online Manual

Changing the Settings in the Wired LAN Sheet

Note
This screen is not available depending on the printer you are using.
Activate the wired LAN setting of the printer to change the settings in the Wired LAN sheet.
1. Start up IJ Network Tool.
Starting up IJ Network Tool
2. Select the printer in Printers:.
3. Click the Configuration... button.
4. Click the Wired LAN button.
5. Change the settings or confirm.
Click OK after changing configuration. A screen is displayed asking you for confirmation before
the settings are sent to the printer. If you click OK, the settings are sent to the printer and the
Transmitted Settings screen is displayed.
1. TCP/IP Setting:
Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your
network environment.
Get IP address automatically
Select this option to use an IP address automatically assigned by a DHCP server. DHCP
server functionality must be enabled on your router.
Use following IP address
If no DHCP server functionality is available in your setup where you use the printer or you
want to use a particular IP address, select this option to use a fixed IP address.