Maintenance Jobs On The Container; Replacing The Me Container - Kärcher NT 20/1 ME Classic Service Manual

6.9 Maintenance jobs on the container

6.9.1 Replacing the Me container

16
English 5.906-580.0 Rev. 00 (07/13)
Note
The container is engaged in the bumper (chassis). All
snap-in noses must be released for disassembly. In
the event that snap-in noses break off during disas-
sembly, the bumper must also be replaced.

Unhook the snap-in nose on the bumper.

Secure the snap-in nose against snapping back in
place by means of a wedge.

Remove container.

Release the snap-in noses at the suction air duct.

Remove the suction air guidance toward the front.

Install the suction air duct in the new container.

Snap the new container in place in the bumper.