Sd/Usb Playback And Recording - Sangean DDR-66BT Instruction Manual

Hide thumbs Also See for DDR-66BT:
Table of Contents

Advertisement

Using SD cards or USB memory devices
This section describes how to use your radio to access and playback your audio files via USB
memory devices and Secure Digital (SD, SDHC) cards. The DDR-66BT can also record to SD,
SDHC or USB media in MP3 format.
GB
Important:
Your radio is only designed to work with USB memory flash memory devices. It is not intended to
be connected to hard disk drives or any other type of USB device.
The DDR-66BT has been tested with a range of USB memory devices of up to 64GB capacity
and SD cards up to 2GB and SDHC cards up to 16GB are supported. However, there are many
different card variants available and not all cards can be guaranteed to work in the DDR-66BT.
Memory must use the FAT 32 filing system in order to operate in the DDR-66BT.
Audio formats supported for playback are MP3 and WMA. Playback doesnot support files
encoded using WMA lossless, WMA Voice, WMA 10 professional, nor files of any format which
have DRM protection.
Cautions:
In order to minimize the risk of damage to your radio, your SD card or your USB Memory, please
place the unit such that the device cannot easily be knocked while it is inserted in the socket.
Remove the USB or SD card before carrying the unit or if not using the USB or SD feature for
a prolonged period. Place the unit in Standby mode removing your SD card or USB memory
device.
80

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartlink 9

Table of Contents