Headphone Socket And Line Out Socket - Sangean DDR-66BT Instruction Manual

Hide thumbs Also See for DDR-66BT:
Table of Contents

Advertisement

Headphone socket
A 3.5mm Headphone Socket located on the rear of your radio is provided for use with
headphones. Inserting a plug automatically mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We therefore recommend
setting volume to a low level before connecting headphones to the radio. It is also recommended
to reduce the volume before unplugging your headphones.
Important:
Excessive sound pressure from earphones and headphones can cause hearing loss.
To prevent possible hearing damage, do not listen at high volume levels for long periods .
Line out socket (3.5mm Jack)
A 3.5mm Line Out socket located on the rear of your radio is provided for connecting the audio
signal to an external amplifier. Inserting an audio cable into this socket will not mute the internal
loudspeaker. Set the volume control on the radio to minimum if desired.
105

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartlink 9

Table of Contents