Make Calls; Voice Calls - Nokia NSERIES N95-1 User Manual

Make calls

Voice calls

1
In the standby mode, enter the phone number,
including the area code. To remove a number, press
For international calls, press
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2
Press to call the number.
3 Press to end the call (or to cancel the call attempt).
Pressing always ends a call, even if another
application is active. Closing the slide does not end an
active voice call.
To adjust the volume during a call, use the volume key on
the side of your device. You can also use the scroll key. If
you have set the volume to Mute, select
To make a call from Contacts, press
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See 'Copy
contacts', p. 107.
twice for the +
Unmute first.
, and select
.
To call a recently dialled number in the standby mode,
press . Scroll to the number, and press
To send an image or a video clip in a multimedia message
.
to the other participant of the call, select
MMS (in UMTS networks only). You can edit the message
and change the recipient before sending. Press
the file to a compatible device (network service).
To put an active voice call on hold while answering another
incoming call, select Options
the active and the held call, select
connect the active and held calls and drop yourself from
the line, select Options
To send DTMF tone strings (for example, a password),
select Options > Send
search for it in Contacts. To enter a wait character (w) or
a pause character (p), press
send the tone. You can add DTMF tones to the
number or DTMF fields in a contact card.
Tip! When you have only one active voice call, to put
the call on hold, press
again.
During an active call, to route the sound from the handset
to the loudspeaker, select
.
Options
> Hold. To switch between
Options > Swap. To
> Transfer.
DTMF. Enter the DTMF string or
repeatedly. Select
Phone
. To activate the call, press
Options > Activate
> Send
to send
OK to
97