Call Divert; Call Barring - Nokia NSERIES N95-1 User Manual

Image in video call—If video is not sent during a video call,
you can select a still image to be displayed instead.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press .
Show call duration—Activate this setting if you want the
length of a call to be displayed during the call.
Speed dialling—Select On, and the numbers assigned to
the speed dialling keys (
pressing and holding the key. See also 'Speed dial a phone
number', p. 98.
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, , , and
Line in use—This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold in the standby mode.
124
- ) can be dialled by
.
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.

Call divert

Call divert allows you to divert your incoming calls to your
voice mailbox or another phone number. For details,
contact your service provider.
Select which calls you want to divert and the desired
diverting option. To divert voice calls when your number is
busy or when you reject incoming calls, select
the option on (Activate) or off (Cancel), or check whether
the option is activated (Check
Several diverting options can be active at the same time.
When all calls are diverted,
standby mode.
Call barring and call diverting cannot be active at the same
time.

Call barring

Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider.
If busy. Set
status).
is shown in the