Log; Answer Or Reject A Video Call; Call Duration; Call Waiting - Nokia NSERIES N95-1 User Manual

Answer or reject a video call

When a video call arrives,
Press to answer the video call.
be sent to caller?
image, select Yes.
If you do not activate the video call, video sending is not
activated, and you only hear the sound of the caller. A grey
screen replaces the video image. To replace the grey screen
with a still image captured by the camera in your device,
see 'Call', Image in video
To end the video call, press

Call waiting

You can answer a call while you have another call in
progress if you have activated
Settings > Phone
To answer the waiting call, press
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Transfer. To end the active call, press
calls, select Options
104
is displayed.
Allow video image to
is displayed. To start sending live video
call, p. 123.
.
Call waiting in
> Call > Call waiting (network service).
. The first call is put
Options
. To end both
> End all calls.

Log

To monitor the phone numbers of missed, received, and
dialled voice calls, press
Recent calls. The device registers missed and received calls
only if the network supports these functions, the device is
switched on, and within the network service area.
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear
register, scroll to the event, and press

Call duration

To monitor the approximate duration of your incoming and
outgoing calls, press
Tools >
duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code. See 'Phone and
>
SIM card', p. 120.
, and select Tools
Options >
list. To clear an individual event, open a
.
, and select Tools >
Options
> Log >
Clear recent
Log > Call
> Clear