Wlan Wizard; Wlan Internet Access Points - Nokia NSERIES N95-1 User Manual

Tip! To check the unique media access control (MAC)
address that identifies your device, enter
*#62209526# in the standby mode.

WLAN wizard

The WLAN wizard helps you to connect to a WLAN and
manage your WLAN connections.
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the status, and
press .
If the search results of found WLANs, for example,
network found are displayed, to create an internet access
point and start the web browser using this IAP, select the
status, the option Start web
If you select a secured WLAN network, you are asked to
enter the relevant passcodes. To connect to a hidden
network, you must enter the correct network name (service
set identifier, SSID). To create a new access point for
hidden WLAN, select
If you are connected to a WLAN, the IAP name is displayed.
To start the web browser using this IAP, select the status
and the option Cont. Web
connection in the WLAN, select the status and the option
Disconnect WLAN.
26
browsing, and the network.
New WLAN.
browsing. To end the
If WLAN scanning is off and you are not connected to any
WLAN, WLAN scanning off
on and search for available WLANs, select the status and
press .
To start a search for available WLANs, select a status and
the option Search for
select a status and the option
To access the WLAN wizard in the menu, press
select Tools > WLAN wiz.

WLAN internet access points

WLAN To search for WLANs available within range, press
select Tools > WLAN
Select Options and select from the following:
•
Filter WLAN
found networks. The selected networks are filtered out
the next time the application searches for WLANs.
• Details — View the details of a network shown in the
list. If you select an active connection, the connection
details are displayed.
•
Define access
(IAP) in a WLAN.
•
Edit access point
You can also use
points. See 'Wireless LAN', p. 27.
is displayed. To set scanning
WLAN. To set WLAN scanning off,
Switch WLAN scan
wiz..
networks— Filter out WLANs in the list of
point— Create an internet access point
— Edit the details of an existing IAP.
Conn. mgr. to create internet access
off.
, and
, and