Bosch GIS 1000 C Professional Original Instructions Manual page 29

User Mode
Surface temperature, ambient temperature and relative hu-
midity are measured in user mode. The dew point tempera-
ture and the average temperature (mean value of the surface
temperatures during a continuous measurement) are calcu-
lated based on these values.
You can hide the following values in the display as required:
average temperature, relative humidity, ambient tempera-
ture and dew point temperature.
To do so, open the "Main Menu" (see "Navigating the "Main
Menu"", page 30). Select the "Functions" submenu and then
"User Mode". There you can switch the indicators "Average
Temp. ", "Humidity", "Room Temperature" and "Dew
Point" on and off.
For surface temperature measurements you can choose
whether the minimum and maximum values k of the result
scale l are adapted automatically or defined manually. To do
so, go to the "User Mode" menu and then to the "Scale
Range" submenu.
– Select "Auto" if you want the values k to be determined au-
tomatically as in surface temperature mode. The minimum
and maximum temperature values of the measurement ap-
pear in the indicator k as soon as the difference between
the measured values is more than 3 °C.
– Select "Preset" to define the values manually. Set the de-
sired values in the "User Mode" menu under "Scale Low-
er Limit" and "Scale Upper Limit". The manually set min-
imum and maximum values appear in the indicator k.
This enables you to, for example, make screenshots of dif-
ferent measurements comparable using the mark q.
To switch to user mode, return to the standard display screen
if not already on it. Then press the left-hand arrow button 15
or the right-hand arrow button 11 repeatedly until the "User
Mode" window is displayed with a brief explanation of the
mode. To hide the explanation prematurely, press the save
button 9. To hide the explanation and immediately start a
measurement, press the measure button 4.
Press the measure button 4 and aim the measuring tool per-
pendicular to the centre of the measuring object. The select-
ed values are displayed after completion of the measurement.
Bosch Power Tools
Data Transmission
Data Transmission via USB Interface
Fold open the cover 1. Connect the micro USB socket 26 of
the measuring tool to your computer or notebook using the
micro USB cable provided 8. The saved JPG files can be cop-
ied, moved or deleted from the internal memory of the meas-
uring tool. Close the cover 1 again when you remove the micro
USB cable.
Note: Connect the measuring tool via USB only to a computer
or notebook. The tool may be damaged if connected to other
devices.
Note: The battery pack of the measuring tool cannot be
charged via the USB interface. To charge the battery pack,
see "Operation with Battery Pack", page 24.
Data Transmission via Bluetooth®
The measuring tool is equipped with a Bluetooth® module,
which enables data transmission via radio technology to cer-
tain mobile terminals/devices with a Bluetooth® interface
(e.g., smartphones, tablets).
Information about system requirements for a Bluetooth® con-
nection can be found on the Bosch website at
www.bosch-professional.com.
To switch on the Bluetooth® connection on the measuring
tool, open the "Main Menu" (see "Navigating the "Main
Menu"", page 30) and set "Bluetooth" to "On". The indicator
f will appear on the display. Ensure that the Bluetooth® inter-
face is activated on your mobile terminal/device.
Special Bosch applications (apps) are available to extend the
functional range of the mobile terminal/device and for simpli-
fication of the data processing. Depending on terminal/de-
vice, these can be downloaded at the respective app stores:
The connection between mobile terminal/device and measur-
ing tool is established after the Bosch application has started
(if Bluetooth® modules are activated). If multiple active meas-
uring tools are found, select the appropriate measuring tool.
A connection will be established automatically if only one ac-
tive measuring tool is found.
Note: When establishing the connection between the meas-
uring tool and the mobile terminal/device (e.g., smartphone,
tablet) the first time (pairing), the measuring tool's PIN code
may be requested. In this case, enter "0000".
When transmitting data by means of Bluetooth®, time lags
may occur between mobile terminal/device and measuring
tool as a result of poor reception conditions.
English | 29
1 609 92A 0XP | (17/4/15)