Care Of Your Steam Mop - Shark S2901UKCO Owner's Manual

Using Your Removable Handheld Steamer
with the Different Accessories - cont.
fig. 14
USING THE GROUT SCRUBBER
Cleaning Tip: The Grout Scrubber is designed for
removing stubborn messes in hard-to-reach nooks,
corners and in grout where focused scrubbing power
may be needed. It can loosen and dislodge compact dirt
often found in corners and tight places where traditional
methods and cleaning tools tend to push dirt into,
making it difficult to reach and clean. Scrub with the
Grout Scrubber and wipe clean with a cleaning cloth.
1 Attach the Grout Scrubber by snapping into the handle
of the Accessory Hose until it clicks into place.
(fig. 14)
2
Press the power button to start steaming.
3
To remove the Grout Scrubber, press and hold
down the Accessory release button. Then slide out
the tool out.
CAUTION: Turn the unit off before attaching or
removing the Grout Scrubber.
11 FREEPHONE 0800 862 0453
fig. 15
USING THE WINDOW SQUEEGEE
Cleaning Tip: To use the window squeegee, work with
the vapor jet down using top to bottom movements. To do
this without leaving streaks, use lateral movements from
the top to the bottom of the surface.
CAUTION: Always avoid any sudden changes in
temperature to prevent breakage of cracks in
windows.
1
Attach the Window Squeegee by snapping into the
handle of the Accessory Hose until it clicks into
place. (fig. 15)
2
Press the power button to start steaming.
3 To remove the Window Squeegee, press and hold
down the Accessory release button. Then slide out
the Window Squeegee.
CAUTION: Turn the unit off before attaching or
removing the Window Squeegee.

Care of Your Steam Mop

AFTER USE AND STORAGE
1
Press the power button to turn the unit off. Unplug
the cord from the outlet and place the mop into the
upright position. Let the unit cool for 2-3 minutes.
2
When you have finished using the Handheld Steamer,
reattach the handle to the handheld steamer.
fig. 16
3
Remove the cleaning pocket from the mop head by
releasing the quick fasteners and using the loop on
the side of the pocket, avoiding contact with the hot
pocket or dirt.
4 Empty the water tank before storage. Remove the
water tank cap and empty the tank over a sink.
Replace the water cap.
5
To store the Shark ® Multi-Function Steam
Pocket Mop Lite hanging up, first remove the head
®
(after it has cooled and the steam has been released)
then hang on a large hook. (fig. 16)
www.sharkclean.eu 12