Route Guidance; Trip Meter; Retrieve Position Information - Nokia N95-1 Owner's Manual

Route guidance

To use route guidance, select Navigation. Start the route
guidance outdoors. If started indoors, the GPS receiver
may not receive the necessary information from the
satellites.
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the destination,
and the approximate distance to it is shown inside the
compass ring.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences
in altitude are not taken into account when calculating
the distance. Route guidance is active only when you
move.
To set your trip destination, select
destination and a landmark as the destination, or enter
the latitude and longitude coordinates. Select
navigation to clear the destination set for your trip.

Retrieve position information

To view the position information of your current location,
select Position. An estimate of the accuracy of the
location is shown on the display.
76
To save your current location as a landmark, select
Options
with more information, and they can be used in other
compatible applications and transferred between
compatible devices.

Trip meter

Select
distance calculation, and
calculated values remain on the display. Use this feature
outdoors to receive a better GPS signal.
Select
and maximum speeds to zero, and to start a new
calculation. Select
total time to zero.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
Options > Set
and quality of GPS signals.
Stop
> Save position. Landmarks are saved locations
Trip distance > Options >
Stop to deactivate it. The
Reset to set the trip distance and time and average
Restart to also set the odometer and
Start to activate trip