Still Image Camera Settings - Nokia N95-1 Owner's Manual

• To return to the viewfinder to capture a new image,
press the capture key.
To use the picture as wallpaper in the active standby, select
Options > Set as wallpaper.
To set the image as a call image for a contact, select
as contact call image.

Still image camera settings

There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust
'Setup settings—adjust color and lighting', p. 50. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
Image quality—Print 5M - Large
Print 3M - Medium (2048x1536 resolution),
Medium (1600 x 1200), E-mail 0.8M - Med.
resolution), or MMS 0.3M - Small
The better the image quality, the more memory the image
consumes. If you want to print the image, select
- Large, Print 3M - Medium, or
you want to send it through e-mail, select
Med.. To send the image through MMS, select
- Small.
These resolutions are only available in the main camera.
Set
Image setup, see
(2592x1944 resolution),
Print 2M -
(1024x768
(640x480 resolution).
Print 5M
Print 2M - Medium. If
E-mail 0.8M -
MMS 0.3M
Add to album—Select whether you want to save the
image to a certain album in the gallery. If you select Yes,
a list of available albums opens.
Show captured image—Select
captured image after it is taken, or
continue taking pictures immediately.
Default image name—Define the default name for the
captured images.
Extended digital zoom (main camera only)—Select
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.
Capture tone—Select the tone you want to hear when
you take a picture.
Memory in use—Select where to store your images.
Rotate image - Select whether you want the image to be
rotated the right way up when you open it in the gallery.
Restore camera settings—Select
values to the camera settings.
Flash
The flash is available only in the main camera.
Yes if you want to see the
No if you want to
On to
Yes to return the default
49