3-D Tones - Nokia N95-1 Owner's Manual

If you want the caller's name to be spoken when your
device rings, select
caller's name to On. The caller's name must be saved in
Contacts.
To create a new profile, select
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless
network is turned off, as indicated by
strength indicator area. All wireless RF signals to and from
the device are prevented. If you try to send messages, they
are placed in the outbox to be sent later.
When the Offline
without a (U)SIM card.
Important: In the offline profile you cannot make
or receive any calls, or use other features that require
cellular network coverage. Calls may still be possible to
the official emergency number programmed into your
device. To make calls, you must first activate the phone
function by changing profiles. If the device has been
locked, enter the lock code.
When you have activated the
use the wireless LAN, for example, to read your e-mail or
browse on the internet. Remember to comply with any
78
Options > Personalise, and set
Options > Create
in the signal
profile is active, you can use your device
Offline profile, you can still
applicable safety requirements when establishing and
Say using a wireless LAN connection. See 'Wireless LAN', p. 25.
You can also use Bluetooth connectivity while in the
Offline profile. See 'Bluetooth connectivity', p. 28.
new. To leave the Offline
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength).

3-D tones

Press , and select
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select
effects > On. To change the ringing tone, select
tone and the desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory
modify the effect, select from the following settings:
Trajectory speed—Scroll left or right to adjust the speed at
which sound moves from one direction to another. This
setting is not available for all ringing tones.
Reverberation—Select the type of echo.
profile, press the power key, and select
Tools > 3-D tones. With 3-D tones
3-D ringing tone
and the desired effect. To
Ringing