Connection Manager - Nokia N95-1 Owner's Manual

You can also use Conn. mgr.
points. See 'Wireless LAN', p. 27.
Operating modes
There are two operating modes in wireless LAN:
infrastructure and ad hoc.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a wireless LAN access point device, or
wireless devices are connected to a wired LAN through a
wireless LAN access point device.
In the ad hoc operating mode, devices can send and receive
data directly with each other. To create an internet access
point for an ad hoc network, see 'Access points', p. 122.

Connection manager

Data connections
Press , and select Tools
connections. In the active connections view, you can see
the open data connections: data calls (
connections ( or ), and wireless LAN connections
( ).
to create internet access
> Conn. mgr. > Active data
), packet data
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select
close all open connections, select
all.
To view the details of a connection, select
Details. The details shown depend on the connection type.
Wireless LAN
To search for wireless LANs available within range, press
, and select Tools > Conn. mgr.
networks.
The available wireless LAN view shows a list of wireless
LANs within range, their network mode
Ad-hoc), and signal strength indicator.
networks with encryption, and
active connection in the network.
To view the details of a network, select
To create an internet access point in a network, select
Options > Define access point.
Options > Disconnect. To
Options > Disconnect
Options >
> Available WLAN
(Infrastructure
is shown for
if your device has an
Options > Details.
or
27