Log; Call Waiting; Call Duration; Packet Data - Nokia N95-1 Owner's Manual

If you do not activate the video call, video sending is not
activated, and you only hear the sound of the caller. A
grey screen replaces the video image. To replace the grey
screen with a still image captured by the camera in your
device, see 'Call',
To end the video call, press

Call waiting

You can answer a call while you have another call in
progress if you have activated
Settings > Phone
To answer the waiting call, press
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Transfer. To end the active call, press
calls, select Options

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press
Log > Recent calls. The device registers missed and
received calls only if the network supports these
100
Image in video call, p. 119.
.
Call waiting in
> Call > Call waiting (network service).
. The first call is put
Options
. To end both
> End all calls.
, and select Applications
functions, the device is switched on, and within the
network service area.
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear
register, scroll to the event, and press

Call duration

Tools > To monitor the approximate duration of your incoming and
outgoing calls, press
Log > Call duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
> To clear call duration timers, select
timers. For this you need the lock code. See 'Phone and
SIM card', p. 116.

Packet data

To check the amount of data sent and received during
packet data connections, press
>
Applications
be charged for your packet data connections by the
amount of data sent and received.
Options
list. To clear an individual event, open a
, and select Applications
Options
, and select
> Log > Packet data. For example, you may
> Clear recent
.
>
> Clear