Record Videos - Nokia N95-1 Owner's Manual

seconds, or 20 seconds. To activate the self-timer, select
Activate. The self-timer indicator (
device beeps when the timer is running. The camera takes
the picture after the selected delay elapses.
To switch off Self
timer > Off.
Tip! In the active toolbar, select
seconds to keep your hand steady when taking a
picture.

Record videos

1 To activate the main camera, open the lens cover. If
the camera is in the
from the active toolbar.
2
Press the capture key to start recording. In the portrait
mode, use the scroll key for recording. The red record
icon is shown and a tone sounds, indicating that
recording has started.
3
Select Stop to stop recording. The video clip is
automatically saved to the
Gallery. See 'Gallery', p. 55. The maximum length of
the video is 60 minutes (if enough memory available).
To pause recording at any time, press Pause. The pause
icon ( ) blinks on the display. Video recording
automatically stops if recording is set to pause and there
52
) blinks and the
timer, in the active toolbar, select
Self timer
Image mode, select Video mode
Images & video
are no keypresses within a minute. Press
resume recording.
To zoom in or out of the subject, press the zoom key on the
side of the device.
Self
To make lighting and color adjustments before recording a
video, use the scroll key to scroll through the active
> 2 toolbar. See 'Setup settings—adjust color and lighting',
p. 50 and 'Scenes', p. 50.
To free memory before recording a video, select
Go to free memory
images or video clips). See 'Free memory', p. 58.
To activate the front camera, select
secondary camera.
Video capture indicators
The video viewfinder displays the following:
1 The current capture mode indicator.
2
The audio mute on indicator.
3
The active toolbar, which you can scroll through before
folder of
recording to select different items and settings (the
toolbar is not displayed during recording). See 'Active
toolbar', p. 47.
4 The total available video recording time. When you are
recording, the current video length indicator also
shows the elapsed time and time remaining.
Continue
(only available if you have backed up
Options > Use
to
Options >