Packet Data Access Points - Nokia N86 User Manual

define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and
packet data access points to an internet access point
group and use the group for browsing the web. If you
give the WLAN access point the higher priority, the
device connects to the internet through a WLAN if
available and through a packet data connection if not.
To create a new access point group, select
Manage New
>
To add access points to an access point group, select
the group and Options
an existing access point from another group, select the
group, scroll to an existing access point, and select
Options Organize
>
To change the priority order of access points within a
group, scroll to an access point, and select
Organize Change
>

Packet data access points

Select Menu Tools
>
Destinations
>
instructions on the display. Or, open one of the access
point groups, select an access point marked with
and select Edit.
Use the instructions provided by your service provider
to edit the following:
152
destination.
New access point. To copy
>
Copy to other dest..
>
priority.
Settings and Connection
>
Access point, and follow the
Access point name
●
provided by your service provider.
User name
●
make a data connection, and is usually provided by
your service provider.
Prompt password
●
to ask for a password every time you log into a
server, or if you do not want to save your password
in the device, select Yes.
Options
>
Password
●
a data connection and is usually provided by your
service provider.
Authentication
●
your password encrypted or
password encrypted when possible.
Homepage
●
you are setting up, enter the web address or the
address of the multimedia message center.
Options
>
Use access point
●
set the device to ask for confirmation before the
connection using this access point is created, or
Automatically
>
destination using this access point automatically.
Select Options
following:
,
Network type
●
to transfer data to and from your device. The other
settings depend on the selected network type.
— The access point name is
— The user name may be needed to
— If you want to set the device
— A password may be needed to make
— Select Secure to always send
Normal
— Depending on the access point type
— Select After confirmation
to set the device to connect to the
Advanced settings
>
— Select the internet protocol type
to send your
to
and from the