Capture Images In A Sequence - Nokia N86 User Manual

To use the image as wallpaper in the active standby
mode, select Options
To set the image as a call image for a contact, select
Options Assign to
>
To return to the viewfinder to capture a new image,
press the capture key.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use
the flash on people or animals at close range. Do not
cover the flash while taking a picture.
The camera of your device has a dual LED flash for low
light conditions.
Select the desired flash mode from the active toolbar:
Automatic ( ), Red-eye
Video light
To increase light levels when recording video in low
light, select .
Scenes
Scenes are only available in the main camera.
A scene helps you to find the right color and lighting
settings for the current environment. The settings of
each scene have been set according to a certain style
34
or environment.
Set as wallpaper.
>
contact.
( ), On ( ), and Off
The default scene in the image mode is Auto, and in
the video mode
To change the scene, in the active toolbar, select
modes and a scene.
To make your own scene suitable for a certain
environment, scroll to
Options > Change. In the user defined scene you can
adjust different lighting and color settings. To copy the
settings of another scene, select
mode and the desired scene. To save the changes and
return to the scenes list, press Back. To activate your
own scene, scroll to
and select Select.

Capture images in a sequence

The sequence mode is available only in the main
( ).
camera.
To set the camera to capture images in sequence (if
enough memory is available), in the active toolbar,
select Sequence
To start capturing images in a quick sequence,
selectBurst, and press and hold the capture key. The
device captures images until you release the key or
until the memory runs out. If you press the capture key
briefly, the device captures six image in a sequence.
To capture two or more images at defined intervals,
select the desired time interval. To capture the images,
Automatic (both indicated with
User defined, and select
Based on scene
User defined, press the scroll key
mode.
).
Scene