Pc Setup; Wxga Or Vga (Only Pc-Rgb Mode) - NEC NLT-40HDEM2 Owner's Manual

PC Setup

You can adjust horizontal/vertical position, clock, phase,
and auto-configure, reset as you prefer.
Press the MENU button and then
the SETUP menu.
Press the
Control
Press the
desired picture item.
Press the
H-Position / V-Position
This function is to adjust picture to left/right and up/down
as you prefer.
Clock
This function is to minimize any vertical bars or stripes vis-
ible on the screen background. And the horizontal screen
size will also change.

WXGA or VGA (Only PC-RGB mode)

a : When the set is inputted WXGA signal, select the desired WXGA resolution.
b : When the set is inputted 480p signal in VGA mode, select 480p on the SETUP menu.
38
D / E
G button and then button to select
D / E
.
G D E
button and then / button to select the
F G
/ button to make appropriate adjustments.
SETUP
SETUP
Language
Language
PC Control PC Control
PC Control
WXGA WXGA
VGA VGA
Child Lock
Child Lock
E D D F G
OK MENU
E D D G
OK MENU
Phase
This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
button to select
Auto
This function is for the automatic adjustment of the screen
PC
position, clock and phase. The displayed image will disap-
pear for a few seconds while the Auto-configuration is in
progress.
Reset
This function allows you to return to the good picture repro-
duction programmed at the factory and cannot be
changed.
Note : Some signal from some graphics boards may not
function properly. If the results are unsatisfactory, adjust
your monitor's position, clock and phase manually.
Press the OK button to store it for the PC monitor picture.
Press the EXIT button to return to PC mode.
H-Pos. 0
V-Pos. 0
Clock 0
Phase 0
Auto
Reset
SETUP
Language 1024X768
PC Control 1280X768
WXGA
WXGA 1360X768
VGA 1366X768
Child Lock
E D D F G
OK MENU