Connection Of Pc; Pc Setup; Wxga Or Vga (Only Pc-Rgb Mode) - NEC NLT-32HDB3 Owner's Manual

Connection of PC

PC Setup

You can adjust horizontal/vertical position, clock,
phase, and auto-configure, reset as you prefer.
Press the MENU button and then
select the SETUP menu.
G
Press the button and then
.
PC Control
G
Press the button and then
the desired picture item.
F G
Press the / button to make appropriate adjust-
ments.
H-Position / V-Position
This function is to adjust picture to left/right and
up/down as you prefer.
Clock
This function is to minimize any vertical bars or
stripes visible on the screen background. And the
horizontal screen size will also change.
Phase
This function allows you to remove any horizontal
noise and clear or sharpen the image of charac-
ters.
Auto
This function is for the automatic adjustment of the
screen position, clock and phase. The displayed

WXGA or VGA (Only PC-RGB mode)

a : When the set is inputted WXGA signal, select
the desired WXGA resolution.
b : When the set is inputted 480p signal in VGA
mode, select 480p on the SETUP menu.
button to
D / E
button to select
D / E
button to select
D / E
image will disappear for a few seconds while the
Auto-configuration is in progress.
Reset
This function allows you to return to the good pic-
ture reproduction programmed at the factory and
cannot be changed.
Note : Some signal from some graphics boards
may not function properly. If the results are unsat-
isfactory, adjust your monitor's position, clock and
phase manually.
Press the OK button to store it for the PC monitor
picture.
Press the EXIT button to return to PC mode.
SETUP
Language
PC Control
WXGA
VGA
Child Lock
E D G
SETUP
Language H-Pos.
PC Control PC Control V-Pos.
WXGA Clock
VGA Phase
Child Lock Auto
Reset
E D F G
OK MENU
SETUP
Language 1024X768
PC Control 1280X768
WXGA
WXGA 1360X768
VGA 1366X768
Child Lock
E D F G
OK MENU
OK MENU
0
0
0
0
41