ENGLISH PDP Television Owner s Manual PXT-32XD3 Please read this manual carefully before operating your set. Retain it for future reference. See the label attached on the back cover and quote this information to your dealer when you require service.
Wall Mounting Information/ VIDEO input Technical Drawing How to connect a device using NEC Service Centers HDMI Connection To play from the device using HDMI FOR PDP TV In a cold condition, there may be a small “flicker” when it is first turned on. This is normal, there is nothing wrong with TV.
Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
Safety Instructions - The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. - Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation “WARNING - To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.
Service Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call NEC Service centre. Aerial Connect the aerial cable to the socket marked ATV/DTV Tuner on the back cover. For the best reception an outdoor aerial should be used.
Remote Control Remote Control 1. POWER( ): Press to turn on and off. 2. Mute( ): Switches the sound on or off. 3. 0~9 Number Buttons: Press 0~9 to select a channel, and input the password. 4. SLEEP:Press repeatedly until it displays the time in minutes (10,20, 30, 40, 50, 60, 90, 120 and Off) that you want the TV to remain on before shutting off.
Remote Control 17. INFO: Press to display the channel information; this information disappears after 9 seconds. 18. PSM: Press to cycle through the picture modes: Cinema/Sport/Vivid/Hi-Bright/User. 19. SSM: Press to cycle through the sound modes: Concert/LivingRoom/Hall/Bathroom/Cave/Arena /Church/Off. 20. ARC: Press to change the screen size, such as Auto, Normal, Letterbox.
Basic Operation Insertion of Batteries: - Turn the remote control upside down, press and slide off the battery cover. - Insert two 1.5V (AAA) batteries into the compartment, take care to observe the markings indicated inside. - Replace the cover and slide in reverse until the lock snaps. Range of Remote Control - Ensure the remote control is pointed towards the remote control window on the display unit.
Basic Operation Connecting the DVD player or HDTV Set-top box using YPbPr input Remove power from the PDP (unplug from the wall outlet) and external equipment before connecting cables. Green 1. Connect the YPbPr output of the DVD or HDTV White Set-top box to the YPbPr input of the PDP.
Basic Operation Connecting the DVD, VCR or other video apparatus using AV and S-VIDEO input Remove power from the PDP (unplug from the wall outlet) and external equipment before connecting cables. 1. With an S-VIDEO cable connect the PDP to the VCR or other device. S-VIDEO will connect only the video portion (image only) of the signal.
Basic Operation How to connect a device using HDMI Connection: Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the device. To play from the device using HDMI: 1. Turn on your TV, then press Source button. The Source menu opens. 2.
Basic Operation Connecting the Computer using VGA input Remove power from the PDP (unplug from the wall outlet) and external equipment before connecting cables. 1. Connect the PDP to the computer with the D-Sub (VGA) cable. 2. Connect the audio output of the computer to the VGA-Audio input on the PDP.
Basic Operation Connecting a Digital Amplifier Switch off TV and external equipment before connecting cables. 1. Connect to the PDP Coaxial Output to the Audio Amplifier Coaxial In terminal by a coaxial cable. 2. Press Power to turn on the TV, then turn on external equipment.
Basic Operation Initial Setup Instruction Guide Connect the power and antenna to your television; then Initial Setup Welcome turn on the TV. The first time you use your PDP the initial Welcome to use Wizard for Initial Setup !! setup menu Welcome will appear on the screen: “...
Basic Operation Power ON/OFF: The Display is in Standby mode - Press POWER ( ) button on the remote control or on the side panel to turn on the unit. POWER The power indicator changes from red to green. - Press POWER ( ) button on the remote control or on the side panel again to return the display to standby mode.
Basic Operation Press the Menu button on the remote control or on the side panel, it will change in the following sequence: Main Menu Menu/exit Sub Menu exit exit 1. Press the Menu button to display the menu system. 2. Press button to select the menu pages.
6. Basic Operation Adjustment of Saturation (inactive for VGA) “ ” Video Brightness Contrast Audio 1. Press the Menu button, and the Video menu “ ” Saturation appears. Sharpness 2. Press or Enter button to enter the Video menu. “ ”...
Basic Operation Selection of Color Temperature “ ” 1. Press the Menu button, and the Video menu “ ” appears. Video Brightness 2. Press or Enter button to enter the Video “ ” Contrast Audio Saturation menu. 3.Press button to highlight your selection. Sharpness Setup Color Temperature...
Basic Operation Table of Video Adjustment Setting Description Item Status Off, Low, Medium, Select to control the sharpness and Strong Auto noise reduction. Off, Low, Medium, Select dynamic color improvement Strong level. Selecting On to correct the flesh “ ” On, Off Flesh Tone tone automatically.
Basic Operation Table of Display Adjustment Items Description button to select it. H. Position Use < or > button to move the image left or right. button to select it. V. Position Use < or > button to move the image up or down. button to select it.
Basic Operation Selection of SPDIF Type “ ” 1. Press the Menu button, and then press Video Balance to select the Audio menu. “ ” Bass Audio 2. Press or Enter button to enter the Audio menu. “ ” Treble Sound Surround 3.
Basic Operation Using the Channel Scan “ ” 1. Press the Menu button, and then press to select the TV menu. “ ” 2. Press or Enter button to enter the TV menu. “ ” 3. Press or button to highlight your selection. 4.
Basic Operation Selection of “C hannel Edit ” 1. Press the Menu button, and then press select the “TV” menu. Video Country Australia 2. Press or Enter button to enter the “TV” Menu. Country Region NSW/ACT Audio 3. Press button to highlight your selection. Stereo Audio Channel Channel Scan...
Basic Operation Item Status Channel Number: 0~9999 1~9, Channel Name: 0~999 Frequency Auto, PAL Color system Sound system Selection of Analog channel Fine Tune “ ”(only for ATV) Video Country Australia 1. Press the Menu button, and then Country Region NSW/ACT Audio press...
Basic Operation Setup Page Menu Video Time Setup Use of the Time Setup menu “ ” Reset Default Audio 1. Press the Menu button, and then press to select the Setup menu. “ ” 2. Press or Enter button to enter the Setup menu. “...
Basic Operation Using of Time “ ” Video Time Zone GTM +0:00 Time After entering the Time Setup menu: “ ” Audio Sleep Timer 1. Press button to highlight your selection. 2. Press or Enter button to enter the sub-menu. Setup 3.
Basic Operation To Reset Default “ ” The factory setting is to change your own custom setting to factory default setting: Video Time Setup Reset Default 1. Press the Menu button, and then Audio press or button to select “ Setup menu.
Basic Operation Entering the password Video Password **** . When the password is already stored: Press the Audio Password incorrect Number buttons (0~9) to enter the 4-digit password Please enter again! used for blocking channels. Setup Note: The initial password for the system is “0000” . Parental Parental EXIT...
Basic Operation Video Channel Block Using the Program Block item “ ” Program Block Audio 1. After entering the Parental menu, press or “ ” Input Block Change Password button to highlight the Program Block item. “ ” Clean All 2.
Basic Operation Video Channel Block Using the “Input Block” Item Program Block Audio Input Block 1. After entering the Parental menu, press or “ ” Change Password Clean All button to highlight the “Input Block” item. Setup 2. Press or Enter button to confirm. Parental 3.
Basic Operation Using the Channel Block item “ ” 1. After entering the Parental “ ” Video Channel Block menu, press or button to Program Block highlight the Clean Block “ ” Audio Input Block item. Change Password Clean All 2.
Technical Specification Product Model PXT-32XD3 TV System AUTO/PAL VIDEO System NTSC/PAL 32 Diagonal ” Screen Size 708.01mm(H) x 398.4mm(V)+0.5mm Active Area Aspect Ratio 16:9 External Size (with stand) 825 mm (W) x 600 mm (H) x 232 mm (D) External Size (without stand)
Support the Signal Mode A. VGA Mode Horizontal Vertical Frequency Frequency Resolution (Khz) (Hz) 31.5 640 x 480 37.9 37.5 37.9 800 x 600 48.1 46.9 48.4 1024 x 768 56.5 60.0 B. YPbPr Mode Horizontal Vertical Frequency Frequency Resolution (Khz) (Hz) 480p(720x480)
NEC understand that some user’s may wish to mount their PDP Television on the wall or to fixed surface. All NEC Models have this ability, however we strongly recommend that you have this procedure completed by a specialist installer.
Western Australia Perth 45 Sarich Court, Osborne Park 6017 131-632 For Service in outer areas, please contact your NEC retailer for the address of the nearest Authorised NEC Service Centre NEC Australia Pty. Ltd. Display and Home Group 244 Beecroft Road EPPING 2121...