Stereo/Dual/Nicam Reception - NEC NLT-40HDEM2 Owner's Manual

8 8

Stereo/Dual/NICAM reception

In AV mode, you can select output sound for
the left and right loudspeakers.
Repeatedly press the I/II button to select the
sound output.
L+R
to left loud-speaker and audio signal from
audio R input is sent to right loudspeaker.
L+L
to left and right loudspeakers.
R+R
to left and right loud-speakers.
Mono sound selection
In stereo reception if the stereo signal is
weak, you can switch to mono by pressing
the I/II button twice. In mono reception the
depth of sound is improved. To switch back
to stereo, press the I/II button twice again.
30
:Audio signal from audio L input is sent
: Audio signal from audio L input is sent
: Audio signal from audio R input is sent
Language selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to , or
DUAL I DUAL II DUAL I+II
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
sends the secondary broadcast language to the loudspeak-
DUAL II
ers.
sends a separate language to each loudspeaker.
DUAL I+II
If your set is equipped with the receiver for NICAM reception, the high
quality NICAM (Near Instantaneous Companding Audio Multiplex) dig-
ital sound can be received.
Sound output can be selected according to the type of received broad-
cast as follows by pressing the I/II button repeatedly.
When NICAM mono is received, you can select
MONO.
When NICAM stereo is received, you can select
FM MONO. If the stereo signal is weak, switch to FM mono.
When NICAM dual is received, you can select
NICAM DUAL II or NICAM DUAL I+II
is selected the display MONO appears on the screen.
by pressing the I/II button
or FM
NICAM MONO
NICAM STEREO or
,
NICAM DUAL I
or MONO . When FM mono