Advertisement
Advertisement
Table of Contents
Related Manuals for NEC FS-5172
Summary of Contents for NEC FS-5172
-
Page 1: Instruction Manual
Colour Television INSTRUCTION MANUAL N-3481 N-4881 FS-5172... -
Page 2: Table Of Contents
Contents Important safeguards Before Operation Connecting external equipment Identification of Controls Daily use Menus Teletext Troubleshooting Specifications... -
Page 3: Important Safeguards
Important safeguards WATER AND MOISTURE Never install the set in the following places : In a wet basement, bathroom. Do not place any container with liquid on the set. HEAT Never place the set near heat sources. VENTILATION Do not cover the ventilation openings in the cabinet and never place the set in a confined space such as a bookcase or built-in unless proper ventilation is provided. -
Page 4: Before Operation
Before Operation Battery options INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT. Insert the batteries (two 1.5V, type AA) MAINS CONNECTION Plug the mains cable into the power socket with 240V, 50Hz AC. AERIAL CONNECTION When using an outdoor aerial, it is usually connected to the set by means of 75 ohm. -
Page 5: Connecting External Equipment
Connecting external equipment TV AND A TV AND A Use the TV/VIDEO button on the remote control or on the front of the set to select one of the two options. Whenever the TV/VIDEO button is pressed, the on-screen display will be changed as shown: RCA JACK A V (BACK) RCA JACK A... - Page 6 RCA JACK A V (FRONT) RCA JACK A V (FRONT) Connect the AV (Audio/Video) socket with an appropriate cable to the corresponding socket of the external equipment. Select AV mode by pressing the TV/VIDEO button. Press the TV/VIDEO button to return to the TV mode. HEADPHONE JACK Insert the headphone plug(3,5mm) into the headphone socket.
-
Page 7: Identification Of Controls
Identification of Controls LOCAL CONTROL LOCAL CONTROL Front Back ON/OFF TV/VIDEO VIDEO AUDIO MENU STAND-BY VIDEO AUDIO MAIN CHANNEL VOLUME TV/VIDEO REMOTE VIDEO AUDIO STAND-BY VIDEO/AUDIO VIDEO/AUDIO ON/OFF DOWN/UP DOWN/UP /MENU SENSOR INPUT INPUT PHONE INDICATOR INPUT OUTPUT BUTTON BUTTONS BUTTONS BUTTON REMOTE CONTROL... -
Page 8: Daily Use
DAILY USE PROGRAMME SELECTION PROGRAMME SELECTION Direct selection Use remote control NUMBER 0…9 buttons. For two digits programme numbers, press the button for the second digit within 2.5 seconds. Up/Down moves Use CH UP/DOWN buttons of the remote control unit or on the front of the set. - Page 9 SLEEP FUNCTION SLEEP FUNCTION Pressing repetitively the remote control SLEEP button, SLEEP you can enter one of the following settings : 00 > 30 min > 60 min > 90 min > 120 min > 00 The set will be turned off after the time you set. The remaining time before TV turn-off is displayed on programme status.
-
Page 10: Menus
Menus MAIN MENU MAIN MENU All menus are removed within 25 seconds if you don’t press any button. PICTURE Direct selection Press remote control MENU button to display main MENU menu. FEATURES Then, you have the choice among several sub- menus. - Page 11 PICTURE MENU PICTURE MENU Enter PICTURE in the main menu. You can select each function with the UP/DOWN buttons. Use the LEFT/RIGHT buttons to adjust each function. Explanation for each function will be displayed in the lower screen whenever you select the function. (Tint control for AV NTSC only) TURES MENU TURES MENU LANGUAGE...
- Page 12 INST ALL MENU INST ALL MENU AUTO SETUP Automatic search system. EDIT Programme list edition. FREQ Channel Frequency. NAME Channel name. PROGRAM Programme number. STORE TO Programme storage number. EDIT MENU EDIT MENU Programme number. NAME Station name. Skip : programme skipped.
- Page 13 O SETUP O SETUP Select “AUTO SETUP” and Press remote control PICTURE/OK “NORMAL/OK” button more than 2 seconds to start automatic searching. PROGRAMME LIST EDITION PROGRAMME LIST EDITION Select "EDIT" function and confirm with the remote control PICTURE/OK “NORMAL/OK" button : Edit menu appears and shows existing recorded programmes.
- Page 14 MANUAL CHANNEL SETTINGS MANUAL CHANNEL SETTINGS Choose starting point Select with "PROGRAM" function the programme from which you want to start manual tuning.Then, the channel number, the frequency, the name and the programme number of this programme are displayed in the install menu.
- Page 15 Fine Tuning If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to fine tune a signal. Select channel frequency ("FREQ.") function. Press and release the remote control CURSOR RIGHT/LEFT buttons to fine tune a signal. Enter station name Select "NAME"...
-
Page 16: Teletext
Teletext SWITCHING TELETEXT ON/OFF Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the TV mode. SELECTING PAGES The NUMBER button 0..9 are used to enter a page number. The selected page number appears at the top of the screen and the page appears after a short time. - Page 17 IDOUBLING CHARACTER SIZE Repeatedly pressing the SIZE( ) button doubles the character size in the following order: Upper half of the page Lower half of the page Return to normal size. Pressing the MIX button( ) in teletext mode, you can see an aerial channel also in the back ground. If you control bright and contrast in the Mix mode also TV mode is controlled at the same time.
-
Page 18: Troubleshooting
Troubleshooting Sometimes some performance problems can be easily solved by checking seemingly apparent but often overlooked possibilities. Before asking for service, to check these items could save your time and money. SYMPTOM CHECK No picture or sound. • Check the TV set is plugged in. •... -
Page 19: Specifications
RD-D90(Required two 1.5V battries type with AA size) Dimensions(WxHxD) N-3481 : 366 x 338 x 376mm N-4881 : 496 x 446 x 464mm FS-5172 : 516 x 466 x 476mm Weight N-3481 : 10.5Kg N-4881 : 19.5Kg FS-5172 : 20Kg Owing to our policy of continuous product improvement, specifications may change. -
Page 20: Nec Service Centres
Western Australia Perth 45 Sarich Court, Osborne Park 6017 (08)9445 5901 For Service in outer areas, please contact your NEC retailer for the address of the nearest Authorised NEC Service Centre. NEC Australia Pty. Ltd. Home Electronics Group 244 Beecroft Road EPPING 2121...