Canon VIXIA HF20 Instruction Manual page 90

Photos
Refer to this chapter for details on shooting photos - taking
photos and playing them back, capturing photos from video
and printing photos.
Basic Recording
Taking Photos
(OJ
34)
®
PHOTO
~
1 Set the camera mode dial to .:. or
• .p.
2 Turn on the camcorder.
IIItm
By default, photos are
recorded in the built -in memory. You
can set the memory card as the
recording media for photos ([IJ 42).
3 Press
[PHOTO
I
halfway.
Once the focus is automatically
adjusted,
8
will turn green and one
or more AF frames will appear.
4 Press
[PHOTO
1
fully.
The ACCESS indicator will flash as the photo is being recorded.
o
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
90.
Photos