Canon VIXIA HF20 Instruction Manual page 143

r~:l System Setup 2
[Wireless Remote
[lmi On], [&I Off III"]
• • • •
Control]
[Notification Sounds]
['iii»)
High Volume],
• • • •
[-. . ) Low Volume],
[&I
Off]
[Power Saving Mode] [lmi On], [&I
Off]
• • • •
[Quick Start] [&I Off], [11110 min],
•
•
[fEll
20 min], [ . 30 min]
[Control for HDMI]1
[lmi On], [&I Off]
• • • •
mm
mm
[Built-in Mem.],
• •
.2
•
43
[Initialize (Q]/§]]
[Mem. Card]
IU'.ImJ
[Quick Initialization],
[Initialize §I]
[Complete Initialization]
[Photo Numbering] [[!Ii] Reset],
[=
Continuous]
• • • •
[Firmware]
•
1
Option not available when the camcorder is connected to an HOTV using an HOMI
cable.
2
Option available only from the original movies index screen.
[Wireless Remote Control]:
Allows the camcorder to be operated with the
wireless controller.
[Notification Sounds]:
A beep will accompany some operations like turn-
ing on the camcorder, the self-timer countdown, etc.
[Power Saving Mode]:
In order to save power when the camcorder is
powered by a battery pack, it will automatically shut off if left without any
operation for 5 minutes.
• Approximately
30
seconds before the camcorder shuts off, [Auto power
off] will appear.
• In standby mode,
the
camcorder
wiU shut
off after
the
tim~ s(jl(jct~d f6r
the [Quick Start] setting.
[Quick Start]:
Select whether to activate the Quick Start function when
you close the LCD panel in a recording mode ([IJ 48) and the length of
time after which the camcorder will end the standby mode and shut off
automatically.
Additional Information •
143
I