Canon VIXIA HF20 Instruction Manual page 124

When the data requires multiple discs
After a disc is finalized, it will be ejected automatically and a message
will appear. Insert the next disc and close the disc tray.
To create an additional copy of the same disc
After the operation is finished, insert a brand new disc, close the disc
tray and repeat the operation.
o
IMPORTANT
• AVCHD discs containing scenes recorded in MXP mode cannot be cre-
ated with the optional DW-100 DVD burner. Use the software on the
supplied Video Tools CD-ROM to save such scenes.
• While the camcorder is connected to the DVD Burner, do not open the
memory card slot cover and do not remove the memory card.
• Observe the following precautions while the.ACCESS indicator on the
camcorder is on or flashing. Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source or turn off the camcorder or the
DVD Burner.
- Do not change the camcorder's operating mode.
• For important information on handling your discs, refer to IOW-100)
Cautions on handling.
CD
NOTES
• If a scene does not fit entirely in one disc, it may be divided and con-
tinue on the next disc.
I
When thg camcorder cont9.ins
a. Ia.rge
number
of scenes to
be
saved on
discs, it may take a long time for the connection to the DVD Burner
(step 2 above) to be completed. For best performance, we recommend
limiting the number of scenes to be saved to 500 or fewer scenes. (With
500 scenes, it will take approximately 3 minutes to complete the con-
nection.)
• In addition to the JPG image files, Photo DVDs contain a slideshow of
all the photos saved (each played back for approximately 3 seconds).
124 •
External Connections